This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. It’s an ideal auxiliary instrument of various types of small pure water equipment.
|
Measurement range: |
0~20 0~200 0~2000μS/cm |
|
Accuracy |
1.5% (FS) |
|
Stability |
±2 × 10-3 (FS) / 24h |
|
Auxiliary electrode |
Plastic structure; constant: 1.0cm-1 |
|
Temperature compensation component |
NTC |
|
Medium temperature |
5~50℃ |
|
Thread dimension |
1/2″pipe thread |
|
Medium pressure |
0~0.5Mpa |
|
Cable composition |
Quad cable, copper mesh and foil shielded plastic jacket |
|
Cable length |
5m or on other agreement (5~30m) |
|
Temperature compensation |
Automatic compensation， with 25℃ as the reference temperature |
|
Display |
3.5-bit LCD |
|
Power supply |
AC 220V ±10% 50Hz |
|
Power consumption |
≤1W |
|
Environment conditions |
(1) Temperature: 5~50℃
(2) Humidity: ≤85%RH |
|
Dimensions |
48 × 96 × 100mm (height × width × depth) |
|
Slot dimensions for installation |
45 × 91mm (height × width) | |
